CONSTRUCTION
1.The protective cover is wrapped on the bias and has strong
friction resistance and excellent flexibility to protect rubber
body and cable cord.
2.Extention layer is selected by rubber with good extention
performance, mainly sustains part of tension produced by the
running of cravat and can improve the elasticity of cravat. 3.The
tension member is composed of rubber and polyester cable cord
with extuaordinary tenacity to provide great tensile strength.
4.The Compressive layer supports the cable cord in appropriate
position and hold the cushion stuff to give extra flexibility
and minimum heat built-up during engagenment.
Use and maintain
of common V belt
1.The biggest velocity ratio of driver and passive wheel is
1:10 and the highest velocity of common V belt is 25M/S.
2.The center distance of big and small belt wheels shall bigger
than the diameter of big wheel and less than the sum of sidelines
of big and small wheels.
3.The use temperature shall be below 50℃.
4.The times of running per second of common V belt shall be
below 40.
5.Avoid sunniness and rain soak. When use belt, never prize
by tools and shall use shield.
6.New and old V belts can not be used together and polyester
thread and shade V belt can not be used together.
7.Common V belt shall extremely avoid tainting diesel oil,
gas and other kinds of oil.
V带截面基本尺寸
3.The
tension member is composed of rubber and polyester cable cord
with extuaordinary tenacity to provide great tensile strength.